Table of Contents
Advertisement
Configuring the Director
5
Switch Parameters
Preferred Domain ID
5-6
Connectrix ED-64M User Guide
6. Configure the fabric parameters as necessary. Refer to Fabric
Parameters on page 5-10 for descriptions of the parameters:
7. Click Activate to save the configuration and close the dialog box.
8. Set the director on line.
a. Click Maintenance on the Product Manager menu bar and
select Set Online State on the drop-down menu.
b. On the Set Online State window, click Set Online.
9. If you are finished configuring the director, back up the
configuration data. For more information, refer to Backing Up and
Restoring the Configuration on page 7-12.
The switch parameters are described below:
Configure Switch Parameters Dialog Box
Figure 5-3
Use this field to set each director and switch in the fabric to a unique
Domain ID. Fibre Channel addresses in the director include this
Preferred Domain ID, which creates a unique identification for the
port in the fabric.
Set a Preferred Domain ID value in the range 1 through 31.
(The default value is 1.)
CAUTION
!
The Domain ID must be unique for each director/switch in a fabric.
If two directors/switches have the same Domain ID, the E_Ports
(and the fabric) become segmented.
Advertisement
Table of Contents
