Managing Stored Address Configurations; Address Configuration Library Dialog Box - EMC Connectrix ED-64M User Manual

Configuring the Director
5

Managing Stored Address Configurations

5-30
Connectrix ED-64M User Guide
This operation applies only if the director's Management Style is set to
FICON. (Refer to Configuring the Management Style on page 5-2.)
Address configurations (described under Configuring Port Addresses
on page 5-26) are saved to the Address Configuration Library. This
section describes the procedure to manage address configurations in
the library.
To manage saved library entries:
1. Click Configure on the Product Manager menu bar and select
Addresses on the drop-down menu; then click Stored on the
pop-up submenu.
This displays the Address Configuration Library dialog box
(Figure 5-13).

Address Configuration Library Dialog Box

Figure 5-13
2. Click a row to select a configuration entry. Then click the desired
button:
• Activate — Sends a stored configuration to the director for
immediate use. (A warning appears before the action occurs.)
If Active=Saved is enabled in through the Configure Management
Server dialog box, this overwrites the current IPL address
configuration.