Switch Mounting Kit
(DS16B2 - RKH/RKL)
Component
2 switch mounting brackets - see illustration on page 21.
2 short rail assemblies (20.5 inches to 27 inches)
2 long rail assemblies (27 inches to 34 inches)
1 U standard-profile or low-profile bezel (front rack panel)
Bezel supports
2 8-foot IEC power cords, straight C13 to C14 straight
2 7.5-foot USA power cords, straight C13 to N5-15P straight (with the
DS-16B2-RKL kit only)
The switch mounting kit includes rails, bezel, and power cords as
listed in the table below.
See the figure below for an illustration of these components.
EMC Departmental Switch DS-16B2 Installation Guide
Switch Mounting Kit (DS16B2 - RKH/RKL)
Use
2 per switch
2 per switch
2 per switch
1 per switch
2 per switch
2 per switch
(use the ones appropriate for your PDU)
5