Table of Contents
Advertisement
QuikSync Settings
Figure 7-6
Do not change the default settings for automatic backup of the
directory. If you feel that QuikSync is not functioning
EfcData
properly, check the settings using the following steps:
1. Open the QuikSync dialog box using one of these steps:
• From the Windows taskbar, click Start, Programs, Iomega
QuikSync, QuikSync.
• Double-click the QuikSync icon in the Windows status area,
located on the right side of the taskbar.
• Right-click the QuikSync icon and click Settings on the
pop-up menu.
2. Verify that the dialog box is configured exactly as it appears in
Figure 7-5.
The d:\EfcData\ directory is a mirror of c:\EfcData\. Do not change
this location in the Source field.
3. Click the Advanced tab to display the dialog box in Figure 7-6.
Iomega QuikSync Dialog Box (Advanced Tab)
4. Verify that the dialog box is configured exactly as it appears in
Figure 7-6.
5. Click OK.
Backing Up and Restoring the Configuration
Using Maintenance Features
7-17
7
Advertisement
Table of Contents
