Backup
Figure 7-3
Follow these steps fo perform a backup:
1. Backup & Restore Configuration on the drop-down menu.
This displays the window in Figure 7-3.
Backup and Restore Configuration Window
Following is a list of configurations that are backed up to the
Connectrix service processor:
• Identification data (switch name, description, and location).
• Port configuration data (port names, blocked states, and
extended distance settings).
• Operating parameters (described under Configuring Operating
Parameters on page 5-5).
• Switch binding configuration, if it exists.
• SNMP configuration (trap recipients, community names, and
write authorizations).
• Zoning configuration (active zone set and default zone state).
2. To back up data, click Backup.
3. When a message confirms that the backup is complete, click OK.
If the backup fails, a message informs you.
Backing Up and Restoring the Configuration
Using Maintenance Features
7-13
7