Harman Soundcraft Notepad 5 User Manual page 43

NOTEPAD
LEXICON FX > REVERBS
setting.
Tap tempo is also active in this mode to set the repeat time.
In this mode, the parameter control is mapped to vary all three parameters of the selected e ects; the number of
repeats, the reverb time and the room size to produce a progressively fuller sound. Delay is processed rst such that
reverb tails are present on each repeat.
Tap tempo is also active in this mode to set the repeat time.
In this mode, the parameter control is mapped as it would be for Reverb on its own; the reverb time and the room
size. The chorus e ect is xed at a mid-range setting and a small amount of this combined e ect is particularly
e ective on vocals and acoustic guitars.
Pressing down Delay, Chorus and Reverb loads a simple to use slap-echo processing e ect for use in Karaoke sit-
uations where more depth is required. The Parameter knob controls a combination of the repeat time and e ect
tail length.
5, 8FX, 12FX
8.2: PROCESSING
8.2: PROCESSING