Humanscale QuickStand Under Desk Installation Instructions Manual page 11

Removing Plastic Cover (Monitor Stand)
Removing plastic cover (monitor stand) Removing plastic cover (monitor stand)
To remove the plastic covers, pull up on the area shown in the image.
To remove the plastic covers, pull up on the area shown in the image. To remove the plastic covers, pull up on the area shown in the image.
Locking down the tube
Locking Down the Tube
1.Push the tube all
the way down and
continue holding it
2-5.
T IP S F O R UNINSTA LL AT ION
2. While holding the
tube down, look for the
locking mechanism (red
colored).
Removing Plastic Cover (Cable Cover)
Removing plastic cover (cable cover) Removing plastic cover (cable cover)
Place a plastic sheet on the tab shown in the image and
Place a plastic sheet on the tab shown in the image and strike it with a Place a plastic sheet on the tab shown in the image and strike it with a
strike it with a hammer.
hammer. hammer.
* *
You may damage the plastic tab if you use a flathead screw driver. You may damage the plastic tab if you use a flathead screw driver.
* You may damage the plastic tab if you use a flathead screw driver.
11