Satel CA-64 PP Manual

The CA-64 PP expander (also called a subpanel) allows extension of the alarm system with
additional zones and outputs. It can interface with the INTEGRA and CA-64 alarm control
panels. This manual applies to the expander with electronics version 1.3 and firmware 1.03
(or newer).
1. Features
• 8 programmable zones:
− support for NO and NC type detectors;
− support for single EOL and double EOL loops.
• Additional tamper input, NC type.
• 8 programmable outputs:
− 4 relay outputs;
− 4 open collector outputs.
• Power supply output (two terminals).
• 2.2 A switching-mode power supply, provided with battery status monitoring and low
battery disconnect circuit.

2. Specifications

Supply voltage ................................................................................... 18 V AC ±10%, 50-60 Hz
Recommended transformer type .................................................... TR40VA (40 VA / 18 V AC)
Output voltage range ........................................................................................ 9.5...13.8 V DC
Power supply output current ..............................................................................................2.2 A
Battery failure voltage threshold ...............................................................................11 V ±10%
Battery cut-off voltage ..............................................................................................9.5 V ±10%
Battery charging current (switch-over) ........................................................... 400 mA / 800 mA
Current consumption (w/o OC type output load and w/o active relays) ...........................34 mA
Current consumption by active relay................................................................................20 mA
Relay contacts rating (resistive load) ................................................................... 2 A / 24 V DC
Open collector output rating............................................................................ 50 mA / 12 V DC
Environmental class according to EN50130-5 ......................................................................... II
Operating temperature range............................................................................ -10 °C...+55 °C
Maximum humidity .......................................................................................................... 93±3%
Electronics board dimensions ............................................................................. 142 x 102 mm
Weight............................................................................................................................... 190 g
The declaration of conformity may be consulted at www.satel.eu/ce
ZONE / OUTPUT EXPANDER
WITH POWER SUPPLY
®
CA-64 PP
ca64pp_en 07/11