Gazer H521 User Manual page 8

• When the power is on, the status indicator (3) stays blue and
ENG
starts flashing when the recording mode is activated. When the
MVR is charging, the status indicator flashes red (3). In case the
device is fully charged or no power is supplied, the indicator (3)
stays off. To determine the status of the device you can either use
the status indicator or check the display icons.
• The MVR starts recording automatically when the power is on,
there is no need to press REC/SNAP button manually (8).
• The MVR automatically shuts down, saves the video and switches
off when no power is supplied. Manual shutdown (before you
turn off the ignition) is not required. If necessary, you can
manually turn off the MVR by long pressing the ON/OFF button
(6). Use the same button to turn it back on.
You can change the camera exposure in the recording mode by
•
pressing the UP/DOWN button.
Do not turn off the recorder manually if it is in the recording
Note:
mode (this may damage the last recording). First stop the recording
and then turn off the device.
The MVR can operate independently for a certain period of time.
The offline operation time depends on the status and charge of
the removable battery.
Recommendation:
length (2 minutes). In this case, the pauses between videos will be
minimal. The longer the videos are, the longer are the pauses
between them.
8
Usage
Use the recording mode with a minimum video
.