Gazer H521 User Manual page 16

3M scotch tape mount installation
Warning!
ENG
Make sure the place is dry and clean. Do not install the mount on
3M scotch tape at temperature below +5°C. Because of such low
temperature and the difference between the temperature inside
the car and outdoors, the 3M scotch will lose its adhesive proper-
ties and will not be able to fix the mount properly.
1
Unscrew the nut of the
vacuum mount and detach the lower
and upper parts.
3
Use the screw and the nut from
package to securely attach
both parts.
5
16
Wipe the surface of the windshield before installing.
Connect the bottom of the vacuum
mounting with 3M scotch tape.
Attach the frame of the recorder
to the 3M scotch tape mounting.
Prior to installing, determine the exact
MVR position on the windshield. Mark
the installation place. Remember that
once the mount is installed on the car
windshield, you cannot change the
horizontal position of the device (side
to side), only vertical position (up and
down) can be changed afterwards.
2
4