Gazer H521 User Manual page 10

One must adjust the MVR settings before using the device. The main
ENG
settings are optimal by default (factory settings) but in any case,
you must set the exact time and date. This is necessary for correct
functioning in the recording mode and further analysis of recorded
video sequences.
1. Do not connect the MVR to the power supply yet. First make sure
that all the indicators are off and then insert the memory card.
The memory card is inserted with connectors towards the
display.
2. Connect the recorders' power unit to the car's cigarette lighter
socket and supply the power.
automatically switches to the recording mode. That is why you
will see the real time camera image at once (loop-through
channel) and the recording mode indicator will light up.
Recording
mode indicator
Mode
Loop
recording
3. Press the REC/SNAP button to stop the recording first, if you
want to go to the setup menu (the recording mode will take some
time to shut down as it is closing and saving the current file) and
then press the MENU button.
4. Use UP and DOWN buttons to navigate through the menu,
REC/SNAP to go to the submenu, and MENU button to go back.
10
Preparing MVR
Exposure
EV +0 00:24:19
2012/01/08 18:54:12
Date and time captions
(shown in the video)
When you turn on the MVR, it
Recording time
1080Р
Recording quality
Memory card
is inserted
Battery charge
indicator