Set Up; Set Up Lens; Shutter Speed Control; Back Light - Speco HTD8SCS Series User Manual

Operating your camera – SETUP
1) LENS
<DC / MANUAL>
Selects Lens Type.
2) SHUTTER
<AUTO / FLK / FIXED / MANUAL
Adjusts shutter settings.
Flicker-less mode (FLK) reduces on-screen flickering.
Electronic Shutter Control (AUTO) adjusts brightness level on screen.
Manual mode allows you to adjust the shutter speed
from1/60~1/120,000 of a second (NTSC), or 1/50~1/100,000(PAL).
FLK is the only option available when the camera lens is set to the
recommended DC mode.
3) BLC
<ON / OFF>
Provides light level control to overcome severe
backlighting conditions.
4) AGC
<ON / OFF> <ON / OFF>
Adjusts value of AGC gain. Increase the GAIN level to brighten the
picture. (noise / distortion may develop)
>
10