960h intensifier3 series weatherproof dome camera with chameleon cover, weatherproof bullet camera with mount plate, weatherproof dome camera (40 pages)
Page 1
200 New Highway Amityville, NY 11701 631-957-8700 www.specotech.com HT-7246IHR 540 Line Color Dome Camera Intensifier Series Wall & Ceiling Mountable Please read this manual thoroughly before operation and keep it handy for further reference.
Contents Package Contents Precautions Camera Installation Internal Components Features Operating Your Camera * SET UP --------------------------------------------------------------13 * SET UP LENS-------------------------------------------------------14 * SHUTTER SPEED CONTROL ---------------------------------15~18 * BACK LIGHT---------------------------------------------------------19 * AUTO GAIN (AGC) --------------------------------------------- ---20 * WHITE BALANCE ---------------------------------------------------21~22 * REDUCE NOISE-----------------------------------------------------23 9~10 * INTENSIFIER---------------------------------------------------------24 * CAMERA TITLE------------------------------------------------------25~26...
Page 4
PACKAGE CONTENTS Please make sure that the following items are included in the package: 1 HT-7246IHR Camera 4 Mounting Screws 1 Chameleon Dome Cover Please leave this manual with the end-user for future reference. PRECAUTIONS THIS DOME CAMERA SHOULD BE ONLY INSTALLED BY...
Page 5
-CONNECT BNC CABLE TO THE BNC JACK. YELLOW:VIDEO OUT CHAMELEON DOME INSTALLATION If you wish to change the color of the HT-7246IHR, lace the Chameleon Dome over the camera AC 24V Place the Chameleon Dome over the HT-7246IHR and push until It snaps into position.
Page 6
INTERNAL COMPONENTS Mechanical (2) JOY STICK (1) DC AUTO-IRIS LENS Adjust between W (TELE angle (focal length) Set the focus by adjusting ∞ NOTE: BOTH OF THE ABOVE ADJUSTMENTS GET LOCKED INTO POSITION THROUGH THE USE OF "LOCKING HANDLES". (2) JOY STICK TO SET THE OSD (ON SCREEN DISPLAY) , PRESS THE JOY STICK FOR ONE SECOND AND SET AS DESCRIBED IN THE MANUAL...
Page 7
Features ♣ SLC When the image is in front of strong background lighting, your camera allows you to get a properly balanced image. ♣ INTENSIFIER 1/3 inch high density CCD and digital processor permit high quality pictures to be captured in very low light conditions.
Operating your camera ◈OSD Function LENS OPTION ●DC ●MANUAL SHUTTER ●OFF ●F/L ●MANUAL WHITE BALANCE ●ATW ●AWC MANUAL● SLC – ( Speco Light Compensation ) ●OFF ●LOW ●MIDDLE ●HIGH Auto Gain ●OFF ●LOW ●MIDDLE ●HIGH SET UP MENU REDUCE NOISE ●OFF ●LOW ●MIDDLE ●HIGH INTENSIFIER ●AUTO...
Page 9
Operating your camera SET UP 1. Press the SET button (JOYSTICK) to access the SETUP mode. ●SETUP menu is displayed on the monitor screen. 2. Select the desired feature using the UP or DOWN button. ●Each time you press the UP or DOWN button, the arrow indicator moves up or down.
Page 10
Operating your camera – SHUTTER SPEED CONTROL① ▶When DC LENS is selected, press the SET button To control the BRIGHTNESS. Notes ●AUOT IRIS LENS (DC TYPE) is recommended 2) Shutter status and speed control You can control brightness of the screen by the shutter speed. ①...
Operating your camera – SHUTTER SPEED CONTROL ② ▶MANUAL : When setting the shutter speed manually, ▶ELC : You can control the BRIGHTNESS. You can select a speed from ‘1/60’ to ‘1/200,000’sec ③ When completed, press ‘SET’ Notes ●Avoid pointing the camera directly at a fluorescent lamp. ●When the SHUTTER menu is set to FLK mode, the INTENSIFIER will not work.
Operating your camera - BACKLIGHT 3) SLC (Speco Light Compensation) – BLC/WDR A built-in SR chip provides intelligent light level control to overcome severe Backlight conditions. ① Press the SET button to display the SETUP menu and move the arrow indicator to ‘SLC’ using the UP or DOWN button. ②...
Operating your camera - 5) WHITE BALANCE ① Press the SET button to display the SETUP menu and move the arrow indicator to ‘WHITE BALANCE’ using the UP or DOWN button. ② Set ‘WHITE BAL.’ to the desired mode using LEFT or RIGHT button. ▶ATW (Auto Tracking White Balance) : When color temperature is 2400~12000K, select this mode.
Operating your camera - 6) REDUCE NOISE (Dynamic Noise Reduction) DNR reduces the video noise on the screen. ① Press the SET button to display the SETUP menu and move the arrow to ‘REDUCE NOISE’ using the UP or DOWN button. ②...
Operating your camera - CAMERA TITLE① 8) NEXT PAGE ① Press the SET button to display the SETUP menu and move the arrow indicator to ‘NEXT PAGE’ using the UP or DOWN button. ② SET ‘NEXT PAGE’ to the desired mode using the LEFT or RIGHT button.
Page 16
Operating your camera – DAY/NIGHT/SYNC (2) COLOR : You can choose color and B/W mode electronically. ① Press the SET button to display the setup menu and move the arrow indicator to ‘COLOR’ using the UP and DOWN button. ② SET ‘COLOR’ to the desired mode using the LEFT or RIGHT button. ▶COLOR : The camera will always display a color picture ▶AUTO : The camera will switch into the B/W mode under low light conditions.
Operating your camera – MOTION DETECTION (4) Whenever your camera detects motion, THE WORDS “motion detected’ will appear on the screen. ① Press the SET button to display the setup menu and move the arrow indicator to ‘MOTION’ using the UP and DOWN button. ②...
Operating your camera - PRIVACY (5) PRIVACY : To mask area that you want to be private. ① Press the SET button to display the setup menu and move the arrow to ‘PRIVACY’ using the UP and DOWN button. ② SET ‘PRIVACY’ to the desired mode using the LEFT or RIGHT button. ▶OFF : Deactivation ▶ON : PRIVACY mode activated -Press the SET button.
Operating your camera - DETAIL (7) DETAIL ① Press the SET button to display the setup menu and move the arrow indicator to ‘DETAIL’ using the UP and DOWN button. ② SET ‘DETAIL’ to the desired mode using the LEFT or RIGHT button. ▶OFF : Deactivation ▶ON : DETAIL control mode (level 0~31) When the level is up, the sharpness will increase.
Troubleshooting If you have trouble operating your camera, refer to the following. Problem Solution Nothing appears on ●Check that the power cord and line connection the screen. between the camera and monitor are proper. ●Check that you have properly connected VIDEO cable the camera VIDEO output jack.
SPECIFICATIONS ITEM HT-7246IHR Power Source 12VDC & 24VAC ( Dual Voltage ) Power Consumption 230mA (DC) / 3.8W (AC) I mage Sensor 1/3” SONY SUPER HAD CCD, Total Pixels 811(H) x 508(V) , 1/3” CCD Effective Pixels 768(H) x 494(V) , 1/3” CCD LENS Type DC AUTO IRIS VARIFOCAL 2.8~11mm...