Connecting Mcn11 To The Ground (Shield) - Siemens SIPLUS CMS4000 Operating Instructions Manual

Operating Instructions
SIPLUS CMS4000 MCN11
4.2.2

Connecting MCN11 to the ground (SHIELD)

The earth connection has to be implemented with cable cross section of 2,5mm
1. Isolate the grounding cable and squeeze a cable lug at the end of the line (M4 ring
eye).
2. Screw the cable lug to the device as shown in the picture. The recommended torque
is 3 Nm.
Picture 13 Connecting MCN11 to the ground (SHIELD)
SIPLUS CMS4000 MCN11
Operating Instructions, 06/2017, A5E02298098A-AA
2
19