Ieee1394 Interface (Lnk) - Siemens SIPLUS CMS4000 Operating Instructions Manual

Operating Instructions
SIPLUS CMS4000 MCN11
4.2.3

IEEE1394 Interface (LNK)

Connect the M12 connector on the front side of the box in the 8-pin socket plug (LNK).
For this purpose use the cable with the order number (MLFB) 6AT8000-2AB20-2AA2.
Caution
Using standard SIPLUS CMS cables is necessary. In case of using self-made cable connection there is no
warranty assumed.
The pictures 14, 15 and 16 shall only explain the concept of the plug type. The principle handling stays the
same.
1. Push the M12 connector in vertical position in the socket plug, so that the slot from the
connector and knurled ring nut are superposed.
Picture 14 Connecting M12 connector
SIPLUS CMS4000 MCN11
Operating Instructions, 06/2017, A5E02298098A-AA
M12 connector
Knurled ring nut
Socket plug
20