Siemens SIPLUS CMS4000 IFN VIB-A Operating Instructions Manual
  1. Manuals
  2. Brands
  3. Siemens Manuals
  4. Media Converter
  5. SIPLUS CMS4000 IFN VIB-A
  6. Operating instructions manual
Siemens SIPLUS CMS4000 IFN VIB-A Operating Instructions Manual

Siemens SIPLUS CMS4000 IFN VIB-A Operating Instructions Manual

Interface node
Hide thumbs Also See for SIPLUS CMS4000 IFN VIB-A:
Table of Contents

Advertisement

Quick Links

Operating Instructions SIPLUS CMS4000 IFN VIB-A
Interface Node
IFN VIB-ACC (IFN VIB-A)
6AT8000-1BB00-4XA0
Operating Instructions - English
Release 2014-11
SIPLUS CMS4000 IFN VIB-A
Operating Instructions, 11/2014, A5E02297871A-AA
Siemens Parts
1
2
3
4
5
6
7
1

Advertisement

Table of Contents
loading

Related Manuals for Siemens SIPLUS CMS4000 IFN VIB-A

Summary of Contents for Siemens SIPLUS CMS4000 IFN VIB-A

  • Page 1: Table Of Contents

    Operating Instructions SIPLUS CMS4000 IFN VIB-A Preface Product Overview SIPLUS CMS4000 Installation Interface Node IFN VIB-ACC (IFN VIB-A) Wiring 6AT8000-1BB00-4XA0 Commissioning and Diagnosis Technical Data Appendix Operating Instructions - English Release 2014-11 Siemens Parts SIPLUS CMS4000 IFN VIB-A Operating Instructions, 11/2014, A5E02297871A-AA...
  • Page 2 Siemens. Trademarks All designations marked with ® are registered trademarks of Siemens AG. Other designations in this documentation might be trade- marks which, if used by third parties for their purposes, might infringe upon the rights of the proprietors.
  • Page 3 Operating Instructions SIPLUS CMS4000 IFN VIB-A Table of Contents Preface ............................5 Purpose of this Document ..................5 Required Basic Knowledge ..................5 Validity of this Document ....................5 Modification compared with the Previous Version .............5 CE Marking .........................5 Standards ........................5 Classification of Information ..................5 Directory ........................6...
  • Page 4 Operating Instructions SIPLUS CMS4000 IFN VIB-A Diagnosis through X-Tools ..................26 Mixed configurations with ION and IFN ..............26 Technical Data ........................28 Standards and Approvals ..................28 Technical specification ................... 30 6.2.1 Communication (LNK0…LNK2) ................30 6.2.2 Power supply (PWR) ....................30 6.2.3...

  • Page 5: Siplus Cms4000

    Operating Instructions SIPLUS CMS4000 IFN VIB-A Preface Purpose of this Document This operating instructions support you to operate the Media Converter Node SIPLUS CMS4000 IFN VIB-A, named IFN VIB-A as peripheral device in the System SIPLUS CMS4000. Required Basic Knowledge Basic knowledge of automation technology and equipment condition monitoring is nec- essary.

  • Page 6: Directory

    Operating Instructions SIPLUS CMS4000 IFN VIB-A Directory The operating instructions describe the hardware of the Interface Node IFN VIB-A. It contains the following topics: • Installation and wiring (Chapter 3 and 4) • Commissioning and diagnosis (Chapter 5) • Order Numbers (Chapter 7) •...

  • Page 7: Product Overview

    Operating Instructions SIPLUS CMS4000 IFN VIB-A Product Overview What is SIPLUS CMS? SIPLUS CMS is an industrial-suited Condition Monitoring System for technical and tech- nological services in industrial plants. SIPLUS CMS is a modular, scalable analysis and diagnosis system. It is optimized for reaction less measurement of analog, binary and numerical data.

  • Page 8: What Is An Interface Node Ifn Vib-A

    Operating Instructions SIPLUS CMS4000 IFN VIB-A What is an Interface Node IFN VIB-A? Definition The interface node IFN VIB-A allows the data sampling of six IEPE sensor signals or five IEPE sensor signals and one analog signal (e.g. speed of rotation).

  • Page 9: Scope Of Delivery

    Operating Instructions SIPLUS CMS4000 IFN VIB-A Scope of Delivery What is delivered? • Device IFN VIB-A (incl. clamp for DIN Rail mounting) • Operating Instructions (compact) Unpacking and Checking After unpacking, please check • the packet for completeness and • all parts for transport damages.

  • Page 10: Installation

    Operating Instructions SIPLUS CMS4000 IFN VIB-A Installation Installation Position, Dimensions Installation Position The interface node IFN VIB-A is suited for installation on a DIN Rail or for attachment with mounting angles. Dimensions and Expansion Spaces Chart 1 Dimensions Dimensions with DIN rail...

  • Page 11: Din Rail

    Operating Instructions SIPLUS CMS4000 IFN VIB-A DIN Rail Characteristics The Device can be installed on a DIN rail (DIN EN 60715 TH35-15). 3.2.1 Installation Requirements The table-track is installed on the device. Procedure Hang the upper table-track of the device on the DIN rail and push it down towards the DIN rail so that it snaps in.

  • Page 12: Disassembling

    Operating Instructions SIPLUS CMS4000 IFN VIB-A 3.2.2 Disassembling Procedure Dissemble all electronic connection cables. Remove the device from the DIN rail: Push the device down against the DIN rail and hang it out. Picture 5 Disassembly of the IFN VIB-A from the DIN rail...

  • Page 13: Mounting Angles

    Operating Instructions SIPLUS CMS4000 IFN VIB-A Mounting Angles Characteristics The device will be installed with mounting angles on a stable base (e.g. wall, mounting plate). 3.3.1 Installation Procedure The „IFN Mounting Set“ is necessary for the installation with mounting angles.

  • Page 14: Label Plate

    Operating Instructions SIPLUS CMS4000 IFN VIB-A Label Plate Characteristics You can mark the device with a label plate. The label plate is exchangeable. Exchanging the label plate 1. Push the screwdriver in the small opening on the bottom edge of the label plate and hang it out.

  • Page 15: Wiring

    Operating Instructions SIPLUS CMS4000 IFN VIB-A Wiring General Rules and Regulations for operation of IFN VIB-A DC 24V-Supply The following chart shows what you have to observe for the DC24 V-Supply. Chart 2 DC 24V-Supply At… you must ensure that …...

  • Page 16: Ifn Vib-A

    Operating Instructions SIPLUS CMS4000 IFN VIB-A IFN VIB-A 4.2.1 Connecting IFN VIB-A to the ground (SHIELD) The earth connection has to be implemented with cable cross section of 2,5mm 1. Isolate the grounding cable and squeeze a cable lug at the end of the line (M4 ring eye).

  • Page 17: Connecting M12-Plugs

    Operating Instructions SIPLUS CMS4000 IFN VIB-A 4.2.2 Connecting M12-plugs Caution The pictures 9, 10 and 11 shall only explain the concept of the plug type. The principle operation stays the same. 1. Push the M12 connector in vertical position in the socket plug, so that the slot from the connector and knurled ring nut are superposed.
  • Page 18 Operating Instructions SIPLUS CMS4000 IFN VIB-A 3. The end position (interlock) of the M12-socket plug is now finished. Picture 11 Correct M12-socket plug connection Caution Avoid canting between M12 connector and socket plug! Only when the installation is correct, the protection category IP67 and safe contacting is guaranteed.

  • Page 19: Ieee1394 - Connection (Lnk)

    Operating Instructions SIPLUS CMS4000 IFN VIB-A 4.2.3 IEEE1394 – Connection (LNK) Connect the M12 connector on the front side of the box in the 8-pin socket plug (LNK0 / LNK1/ LNK2). Caution The IEEE1394 standard allows only a maximum length of 4,5 m. Using standard SIPLUS CMS cables is necessary.

  • Page 20: Power Supply Connection (Pwr)

    Operating Instructions SIPLUS CMS4000 IFN VIB-A 4.2.4 Power Supply Connection (PWR) The power supply is connected to the 5-pin circular plug M12 (PWR) on the front side of the device. Y-Connector The Y-Connector enables looping of the 24V DC power supply and it is designed for maximum current load of 4A.

  • Page 21: Messeingänge

    Operating Instructions SIPLUS CMS4000 IFN VIB-A 4.2.5 Messeingänge Connect the sensors / process signals to the 5-pin circular plug M12 (CH1-CH6) on the front side of the device. Chart 6 Channel 1-6, see chapter 6.2 Input IEPE-Sensor 1 Input IEPE-Sensor 2...
  • Page 22 Operating Instructions SIPLUS CMS4000 IFN VIB-A Anschlussbelegung CH6 als Analogeingang Tabelle 7 Anschlussbelegung CH6 als Analogeingang Assignment Wire color Display M (earth) brown +/- 24 V signal white free blue free black free grey or green/yellow Shielding measurement CH1-CH6 Caution...

  • Page 23: Cable Traction Relief

    Operating Instructions SIPLUS CMS4000 IFN VIB-A 4.2.6 Cable Traction Relief Caution You have to prepare adequate cable traction relief! 4.2.7 Sealing of not used round connectors Seal all not used round connectors with M12 end caps, in order to reach the degree of protection IP 67.

  • Page 24: Commissioning And Diagnosis

    Operating Instructions SIPLUS CMS4000 IFN VIB-A Commissioning and Diagnosis Commissioning and Start-up of IFN VIB-A 5.1.1 Software Requirements Tabelle 8 Software requirements for the commissioning Eingesetzte Projektierungssoftware Version SIPLUS CMS4000 X-Tools starting version 3.02 and higher 5.1.2 Requirements for Commissioning 1.

  • Page 25: Uik (Unique Identification Key)

    Operating Instructions SIPLUS CMS4000 IFN VIB-A 5.1.4 UIK (Unique Identification Key) The UIK is a clear, device dedicated identification/address. It is printed on the UIK label plate and deposited in the firmware of the IFN VIB-A. The device is addressed with the UIK.

  • Page 26: Parameterization Of Ifn Vib-A

    Operating Instructions SIPLUS CMS4000 IFN VIB-A Parameterization of IFN VIB-A The IFN VIB-A is parameterized through X-Tools. You will find parameterization details in the „SIPLUS CMS4000 X-Tools Reference Manual”. Diagnosis through X-Tools You will find detailed information in the „SIPLUS CMS4000 X-Tools Reference Manual”...
  • Page 27 Operating Instructions SIPLUS CMS4000 IFN VIB-A PC/104-card Picture 14 MICROBOX PC with CMB IEEE1394A Siemens Parts SIPLUS CMS4000 IFN VIB-A Operating Instructions, 11/2014, A5E02297871A-AA...

  • Page 28: Technical Data

    Operating Instructions SIPLUS CMS4000 IFN VIB-A Technical Data Standards and Approvals Product Name Device SIPLUS CMS4000 IFN VIB-A EMV Directive The product is designed for use in an industrial environment. Area of Application Requirements for Emission Immunity Industry DIN EN 55011:2007 Gruppe 1, Klasse A...
  • Page 29 Operating Instructions SIPLUS CMS4000 IFN VIB-A Notes for the manufactures of machines This product is not a machine in the sense of the EC Machinery Directive. There is therefore no declaration of conformity relating to the EC Machinery Directive 89/392/ECC for this product.

  • Page 30: Technical Specification

    Operating Instructions SIPLUS CMS4000 IFN VIB-A Technical specification 6.2.1 Communication (LNK0…LNK2) Chart 9communication (LNK0…LNK2) Communication Parameter min. typ. max. Unit Connector three connectors (female) 8-pin (M12) Data protocol IEEE1394a / b Data transfer rate Mbps Galvanic isolation Lines to main electronic 6.2.2...

  • Page 31: Measurement Input (Ch1

    Operating Instructions SIPLUS CMS4000 IFN VIB-A 6.2.3 Measurement input (CH1…CH6) In general for all 6 channels: Chart 11 Measurement input 1 to 6 (CH1…CH6) Specifications at TA=25ºC; Test conditions U = 24V DC (rated Voltage); unless otherwise noted; not allowed;...
  • Page 32 Operating Instructions SIPLUS CMS4000 IFN VIB-A Channel 3 to 6: Chart 13 Input channel 3 to 6 (CH3, CH4, CH5, CH6) Specifications at TA=25ºC; Test conditions U = 24V DC (rated Voltage); unless otherwise noted; not allowed; overshoot is leading to demolition;...
  • Page 33 Operating Instructions SIPLUS CMS4000 IFN VIB-A Channel 6: Chart 14 Input channel 6 (CH6) Specifications at TA=25ºC; Test conditions U = 24V DC (rated Voltage); unless otherwise noted; not allowed; overshoot is leading to demolition; only allowed for appropriate IEPE-sensors with connected sensors by Power-Up;...

  • Page 34: Filter Characteristic Channel (Ch1

    Operating Instructions SIPLUS CMS4000 IFN VIB-A 6.2.4 Filter characteristic Channel (CH1…CH6) Amplitude / frequency characteristic "IFN VIB-A" f(Hz); 1,E+03 1,E+04 1,E+05 1,E+06 10,00 0,00 0,00 0,00 0,00 -0,35 -0,87 -1,68 -2,11 -3,45 -7,61 -10,00 -11,30 -14,00 -20,00 -21,40 -28,30 -30,00...

  • Page 35: Environmental Conditions

    Operating Instructions SIPLUS CMS4000 IFN VIB-A 6.2.6 Environmental conditions Chart 16 Environmental conditions Environmental conditions Parameter min. typ. max. Unit Ambient temperature operating °C storage and transport °C Humidity t = +28…32°C; Atmospheric pressure Degree of protection IP67 Height of construction over <...

  • Page 36: Approval

    Operating Instructions SIPLUS CMS4000 IFN VIB-A 6.2.8 Approval Chart 18 Approval Approval Mark Declaration of conformity ATEX approval II 3G Ex nA IIC T4 Gc DEK 14 ATEX 0084 X IECEx approval IECEx DEK 14.0040 X EAC certification KC certification...

  • Page 37: Appendix

    Length 200 cm – 6/6pole 6AT8000-2AA00-1AC0 Length 450 cm – 6/6pole 6AT8000-2AA00-1AE5 Length 450 cm – 4/6pole 6AT8000-2AA10-1AE5 Further information is available from your local Siemens office and from the homepage www.siemens.com/siplus-cms. Siemens Parts SIPLUS CMS4000 IFN VIB-A Operating Instructions, 11/2014, A5E02297871A-AA...

  • Page 38: Dimensional Drawing

    Operating Instructions SIPLUS CMS4000 IFN VIB-A Dimensional Drawing SIPLUS CMS4000 IFN VIB-A Operating Instructions, 11/2014, A5E02297871A-AA...

  • Page 39: Service & Support In The Internet

    Operating Instructions SIPLUS CMS4000 IFN VIB-A Service & Support in the Internet In addition to our documentation pool we offer our complete knowledge base on the In- ternet: www.siemens.com/automation/service&support There you find: • The newsletter, which is constantly updated to provide you with the latest information about your products.

Table of Contents