Siemens SIPLUS CMS4000 Operating Instructions Manual page 18

Operating Instructions
SIPLUS CMS4000 MCN11
6. Slide the sealing insert flush in the cable entry so that the LWL-single connector lays
parallel in the box (in order to avoid a mechanical overload of LWL).
7. Screw and tighten the screwcap on to the cable entry. Recommended tightening
torque: 10Nm
Picture 12 Finished installation
8. Close the casing cover and screw the 4 included screws (from 1) tight. The recom-
mended torque: 3Nm.
Caution
Only when the installation is correct, the screwcap fits tight and the cover screw fits tight the protection
category IP67 is guaranteed.
Never pull and insert optical fiber, when the ambient temperature is 0° Celsius and below (risk of break-
age).
SIPLUS CMS4000 MCN11
Betriebsanleitung, 06/2017, A5E02298098A-AA
18