SETTING TIME OF DAY
The programmer is provided with an
electronic clock with luminous figures
showing the hour and minutes .
The first time the oven is connected up to
the electricity supply and after a power cut,
three zeroes will flash on the programmer
display .
To adjust the time, the two buttons
must be pressed simultaneously and then
the button
or
is set .
Setting speed automatically increases if
you keep the setting buttons pressed .
Fig. 7.2
22
(fig. 7.2)
until the correct time
MANUAL OPERATION
To use the oven manually, i .e . without the
programmer, you must cancel the flashing
A by pressing the two buttons
simultaneously (the letter A will go out and
the symbol
will come on) .
CANCELLING A PROGRAMME
If the letter A is not flashing (which means
that a cooking program has already been
set) by pressing the two buttons
simultaneously you will cancel the program
and switch to manual .
If the oven is on, you must switch it off
manually.
Fig. 7.3