Mitel SMarT-1 EuroRoute Compact Installation & Programming Manual page 42

Search Tables
Lock Codes (L)
Execute Codes (E)
Absorb Codes (A)
Discard Codes (C)
Search Codes (S)
Tone Codes (T)
42 - Compact Dialer
When a match of digits is found, and the Route Code has been executed, the Compact
Dialer will execute the command defined by this code. If the value is 1, then the route
cannot be changed, even if a command to do so is later encountered. If the value is 0,
then the route can be changed if a command to do so is later encountered.
If the value of the previous code (Route Code) is B, then the Special Customer Program
Access codes are active. If the value of the previous code (Route Code) is C, then the
Extended Action codes are active.
When a match of digits is found, and the Route and Lock Codes have been executed, the
Compact Dialer will execute the command defined by this code. If the value is 0, then
no changes will take place. If the value is 1, then the desired Dialling Rule will begin
execution. Once this action has taken place, the call cannot be re-routed.
When a match of digits is found, and the Route, Lock and Execute Codes have been
executed, the Compact Dialer will execute the command defined by this code. If the value
is 0, then no digits will be absorbed. If the value is any digit from 1 through 8 (Dialling
Rule Code 21, refer to page 33), then the number of digits defined by this code will be
absorbed. For example, if the digits 3938000 are matched, and this value is 3, then the
digits 393 will be absorbed. The remaining digits will continue to be screened.
Because the absorbed digits are saved, they can be re-dialled by using the access codes
21 or 23.
When a match of digits is found, and the Route, Lock, Execute and Absorb Codes have
been executed, the Compact Dialer will execute the command defined by this code. If
the value is 0, then no digits will be discarded. If the value is any digit from 1 through
D, then the number of digits defined by this code will be discarded. For example, if the
digits 3938000 are matched, and this value is 3, then the digits 393 will be discarded.
The remaining digits will continue to be screened.
When a match of digits is found, and the Route, Lock, Execute, Absorb and Discard
Codes have been executed, the Compact Dialer will execute the command defined by
this code. If the value is 0, then no action is taken. If the value is 1, then the remaining
digits will be screened in Buffer B, unless the current buffer is B, in which case the Dialer
will quit searching. If the value is 2, then all searching will be stopped, whether the current
Search Table is Buffer A or Buffer B. If the value is 3, then all searching will be stopped
after the inter-digit timer has expired, whether the current Search Table is Buffer A or
Buffer B.
When a match of digits is found, and the Route, Lock, Execute, Absorb, Discard and
Search Codes have been executed, the Compact Dialer will execute the command defined
by this code. If the value is 0, then no action is taken. If the value is 1 through 6, the
Compact Dialer will return a tone relative the number entered, to the user. For example,
if the value is 4, then four tones will be heard by the user.
8346-003-115-BA
Issue 1, August 1999