Mitel SMarT-1 EuroRoute Compact Installation & Programming Manual page 33

Dialer
Hide thumbs Also See for SMarT-1 EuroRoute Compact:
Table of Contents

Advertisement

Dialling Rules
8346-003-115-B
Issue 1, August 1999
The dialling rules are a set of tokens that are used by the Compact Dialer to control
activity, such as dialling access numbers, to the Exchange. Once a match is found in the
search tables that contains a routing command, the dialling rules begin execution. There
are a total of ten dialling rules available.
Register
00 to dial a 0
30 S (Route 1)
01 to dial a 1
31 S (Route 2)
02 to dial a 2
03 to dial a 3
32 S (Route 3)
04 to dial a 4
05 to dial a 5
33 S (Route 4)
06 to dial a 6
07 to dial a 7
34 S (Route 5)
08 to dial an 8
35 S (Route 6)
09 to dial a 9
10 to dial an A
36 S (Route 7)
11 to dial a B
12 to dial a C
37 S (Route 8)
13 to dial a D
38 S (Route 9)
0 to dial a
0# to dial a #
39 S (Route 10)
20 to dial buffer A digits
21 to dial buffer A absorbed digits (A maximum of 8 digits)
22 to dial buffer B digits
23 to dial buffer B absorbed digits (A maximum of 8 digits)
24 to dial respective digit string (Register 20 - 29)
25 to dial Centrex digit (Register 09
26 to switch to MF4
27 to dial the Call Home number
28 to dial the Service Center number
40 to dial route string 1 (Register 40)
41 to dial route string 2 (Register 41)
42 to dial route string 3 (Register 42)
43 to dial route string 4 (Register 43)
44 to dial route string 5 (Register 44)
45 to dial route string 6 (Register 45)
46 to dial route string 7 (Register 46)
47 to dial route string 8 (Register 47)
48 to dial route string 9 (Register 48)
49 to dial route string 10 (Register 49)
50pf to apply tone detector 50
51pf to apply tone detector 51
52pf to apply tone detector 52
53pf to apply tone detector 53
54pf to apply tone detector 54
55pf to apply tone detector 55
56pf to apply tone detector 56
57pf to apply tone detector 57
58pf to apply tone detector 58
59pf to apply tone detector 59
6N to delay Nx100 ms, i.e. 500 ms = 65
7N to delay Nx1 second, i.e. 3 seconds = 73
† Refer to page 6 for the defaults of these registers.
†† Refer to page 29 for valid entries.
††† Refer to Tone Detection Token Definition on page 35 for the complete definition.
Route Registers
S =
††
)
†††
†††
†††
†††
†††
†††
†††
†††
†††
†††
Compact Dialer - 33

Advertisement

Table of Contents
loading

Table of Contents