Mitel SMarT-1 EuroRoute Compact Installation & Programming Manual page 14

Hardware Installation
Basic Hardware Description
Safety Instructions
INSTRUCTIONS
14 - Compact Dialer
Mechanical Description
The Compact consists of a plastic case, enclosed circuitry and an optional outboard power
supply.
Weight:
Main Unit - 120g
Power Supply - 190g
Dimensions:
Main Unit - 126 x 85 x 27mm
Power Supply - 50 x 55 x 65mm
Mounting:
Flush wall mount or desk mount
Electrical Description
The electrical characteristics are provided in the table below.
Power:
12 Volts @ 50 mA
Connections:
Standard RJ11 and power connector
The exclamation point within an equilateral triangle is intended to alert the user to the
presence of important operating and maintenance (servicing) instructions in the literature
accompanying the product.
Failure to follow all instructions may result in improper equipment operation and/or the
risk of electrical shock.
1. All installation personnel should consult the following information before
attempting to install this product.
2. Read all instructions before attempting to install or use this product.
3. Install and configure this product with only the assemblies specified in this guide.
4. Never install telephone wiring during a lightning storm.
5. Never install telephone jacks in wet locations.
6. Never touch telephone wires of terminals unless the telephone line has been
disconnected at the network interface.
7. Use caution when installing or modifying the telephone lines.
8. The AC power socket/outlet should be installed near the equipment and should be
easily accessible.
MECHANICAL
ELECTRICAL
Issue 1, August 1999
8346-003-115-BA