Mitel SMarT-1 EuroRoute Compact Installation & Programming Manual page 23

Display Search Tables—85
Display Serial Number—86
Drop from Program Mode—88
Enter Verify Mode—92
Re-load Defaults—93
Reset Statistics—95
8346-003-115-B
Issue 1, August 1999
When the command 85 is entered, a
Tables, if any exist, will be echoed in the format of the following example:
0612345600000000021100000000.
The first digit represents table A (0) or B (1). The second digit represents the number of
digits to screen (1 through F, representing 1 through 15
the digits to screen. The next thirteen digits represent action codes. Refer to page 39 for
more information on the Search Tables.
† 1=1, 2=2, 3=3, 4=4, 5=5, 6=6, 7=7, 8=8, 9=9, =10, #=11, A=12, B=13, C=14, D=15
(Where A, B, C, & D are Fourth Column tones).
When the command 86 is entered, a
Dialer will echo the eight-digit serial number of the unit being accessed in the following
format:
CBCD9575.
Note: 0=0, 1=1, 2=2, 3=3, 4=4, 5=5, 6=6, 7=7, 8=8, 9=9, =E, #=F, A=A, B=B, C=C,
D=D (Where A, B, C, & D are Fourth Column tones).
When the command 88 is entered, a
Compact Dialer will then connect the user with the subscriber side without saving any
changes that were made to the program during the current programming session. This
command does not affect registers 72, 73, or 74.
When the command 92 is entered, a
Dialer will echo the contents of any register that is entered.
When the command 93 is entered, a
will re-load the factory defaults after the first



the second .


The series of may be heard as three consecutive tones, depending on the length of time
that the dialer takes to load the factory defaults.
When the command 95 is entered either, a
then reset the statistical counters to a value of:
00000000000000000000000000000000000000000000.
General Notes on Programming



will be heard, and the contents of the Search
†
). The next fifteen digits represent


will be echoed to the PSTN side, and the Compact



will be heard, followed by a click sound. The


will be echoed to the remote end, and the Compact




will be heard followed by


and remain in programming mode after



will be heard. The Compact Dialer will
Compact Dialer - 23
. The Compact Dialer