Instructions For Use - Houghton BELAIRE H2000 Owner's Manual

 Switch on the power to the air-conditioner at the isolation breaker.
 Start the air-conditioner by switching to FAN mode to select the fan FAN.
 Operate in low FAN, medium FAN and high FAN in turn to check normal operation.
 To select the COOL mode, adjust the set point temperature to three degrees lower than the room
temperature, the unit will start to blow cold air after the compressor starts.
 To select the HEAT mode, adjust the setting temperature as three degrees higher than the room
temperature, the device will start to blow hot wind soon.
After selecting the COOL/HEAT mode, the compressor will have a delay start
for three minutes.

Instructions for Use

Note
10