Installation Guidance - Houghton BELAIRE H2000 Owner's Manual

Caravan air-conditioner

Hide thumbs Also See for BELAIRE H2000:

Owner's manual (26 pages)

Table Of Contents

Table of Contents

 Read this Manual thoroughly before installation and understand the guidance.

 Abide by the national circuit operation rules in the installation.

 Do not add other parts or restructure the product in the installation.

 The installers shall be equipped with refrigeration technician qualification certificates.

 Consult with HOUGHTON or the local distributor in the case of unusual applications or installation

conditions that are not specifically covered by this manual.

 The RV or caravan roof shall be able to support the air-conditioner's weight (28kg).

 The opening part of the roof shall be able to support the air-conditioner's weight and allow for the

corresponding operations.

 Minimum thickness of roof: ≥25mm; maximum thickness of roof: ≤85mm。

 If the roof's thickness is beyond the above requirements, you can purchase the enhanced length of the

outlet air duct and M8 installation bolts from HOUGHTON or the local distributor.

Load bearing of roof:

 The roof shall be able to bear the weight of the

air-conditioner and shall be level without accumulating

water. It is suggested that the caravan manufacturer

confirms the suitability of the roof for load bearing.

 If the roof is not preserved with holes, they shall be

punched from the top of the roof to the inside and use

them as leading to punch through the ceiling. It is

suggested to consult with the caravan manufacturer to

get the best punching method.

 The 360x360mm hole shall be boarded up with wood

sections that are at least 20mm thick. This boarding is

to ensure that the roof will not crush from the

installation bolts and that air conditioned air does not

enter the ceiling space.