Instructions For Use - Houghton BELAIRE T135C Owner's Manual

 Switch on the power to the air-conditioner at the isolation breaker.
 Start the air-conditioner by switching to FAN mode to select the FAN.
 Operate in low FAN, medium FAN and high FAN in turn to check normal operation.
 To select the COOL mode, adjust the set point temperature to three degrees lower than the room
temperature, the unit will start to blow cold air after the compressor starts.
 To select the HEAT mode, adjust the set point temperature to three degrees higher than the room
temperature, the unit will start to blow hot air after the compressor starts.
After selecting the COOL/HEAT mode, the compressor will have a delay
start for three minutes.

Instructions for Use

Note
10