Honeywell Home THR860S User Manual page 24

Installation and Setup
To test the system
After you have installed and configured the programmer, you should check to make sure the system is
operating correctly.
Set to AUTO
HOT WATER
cont
once
auto
on 1
off
off 1
Press to turn system on or off
mon tue wed
SYSTEM OVERRIDE
12:34
cont
once
auto
on 1
off
off 1
Green lights show system status (on or
off)
1 Set the Heating and Hot Water operating modes to AUTO
HEATING
2 Press the Heating and Hot Water OVERRIDE buttons to turn
cont
once
auto
on 2 on 3
off
off 2 off 3
3 Press the Heating and Hot Water OVERRIDE buttons again to
4 Check to ensure the factory-set date and time are correct.
thu fri sat sun
PM
cont
once
auto
on 2 on 3
off
off 2 off 3
the heating and hot water on. The indicator lights should be
lit. In case of difficulty.
turn the heating and hot water off.
24