Table of Contents
Advertisement
Installation and Setup
Mounting options
Breakout tabs accommodate
surface wiring if needed
Mount flush on wall
Mount on existing junction box
Use appropriate wood screws or anchor
screws to mount the wall bracket flush
against the wall. Use metal screws to mount
on an existing junction box.
Pull wiring through the wall bracket and
connect to screw terminals as shown on
page 17.
1 Make sure electrical power is off.
2 Install wall bracket as shown at left.
3 Connect system wiring as shown then
replace programmer on wall bracket and
secure with screws.
16
Hide quick links:
Advertisement
Table of Contents
