Operation and Programming
Date/time settings
Set to DAY/TIME
mon tue wed thu fri sat sun
SET THE DAY
30
RUN
+
Press
or
IS DAY OK?
31
Press OK to save
SET THE MONTH
12
To change the date or time, set the slider to DAY/TIME.
Use the + or - buttons to set the correct day, then press the OK
button. Follow the same procedure to set month, year and time.
Date and time are set at the factory and should not need to be
changed unless you turn off the automatic daylight savings
feature (see pages 21-23).
-
to change
TIP: While setting the time, press and hold the
change the clock time more rapidly.
6
+/-
buttons to