Installation And Rack Mounting - Shure IntelliMix P300 Safety Information Manual

Safety Information
⑨ Level Indicators (Sig­
nal/Clip)

Installation and Rack Mounting

Two mounting solutions are available for installing the P300:
CRT1 19" Rack Tray (optional accessory): Supports up to 2 devices (two P300s or one P300 and one ANI4IN,
ANI4OUT, ANI22, or ANIUSB); mountable in a rack or under a table
Single-unit Mounting Tray (included accessory): Supports a single device for mounting under a table
Securing the Devices
Use the included screws from the mounting hardware kit to secure each P300 or Audio Network Interface (ANI).
Devices can be mounted to face either direction. Insert the screws from the bottom in the appropriate holes, ac­
cording to the following diagrams:
Tri-color LEDs indicate the audio signal level for the analog channels. Adjust output
levels in the web application to avoid clipping.
Analog Input/Output
LED State
Off
Green
Yellow
Red
Note: The input and output LEDs stay off when metering is set to Post Fader and
the channel is muted in the web application.
Audio Signal Level
less than -60 dBFS
-60 dBFS to -18 dBFS
-18 dBFS to -6 dBFS
-6 dBFS or more
Shure Incorporated
17/96