Device Identification; Adjusting Settings - Shure IntelliMix P300 Safety Information Manual

Safety Information
Full factory reset (press
button for longer than 8
seconds)
Software Reset Options
Reboot Device:In the web application (settings > factory reset), there is a Reboot Device button, which simply
power­cycles the device as if it were unplugged from the network. All settings are retained when the device is re­
booted.
Restore Factory Defaults: In the web application (settings > factory reset), this restores all network and web ap­
plication settings to the factory defaults. This is the same as performing a full factory reset using the reset button
on the device.
Default Settings Preset: To revert audio settings back to the factory configuration (excluding Device Name, IP
Settings, and Passwords), select Load Preset and choose the default settings preset.

Device Identification

To identify the hardware by flashing the lights, select the Identify button in the navigation menu located on the left
side of the web application.
The Identify button appears as an icon when the menu is collapsed.
Schematic View
The schematic view in the web application provides an overview of the entire signal chain, with the ability to adjust
settings and monitor signals.

Adjusting Settings

Right-click an input, output, or processing block to access the following options:
Per Channel
Copy / paste
Restores all network and web application settings to the factory defaults.
Copy and paste settings between items. For example, set the equalizer curve on
the USB output, and then use the same setting for the analog output. Or, copy the
gain and mute status from one input channel to several others.
Shure Incorporated
21/96