Safety Information
• Send multiple input channels to a single output
Routing Channels
Connect inputs and outputs by selecting the box where they intersect.
Important: Dante devices must be routed in Dante Controller software to pass audio to or from a Dante device.
Default Setting
The default configuration enables calling to multiple far ends with near-end Shure Microphones. Connections are
established for operating hardware codecs, software codecs, and mobile phones simultaneously.
Input / Source Channel
Automix (summed Dante input channels)
Analog - From Codec (Analog input 1)
USB input
Mobile input
Crosspoint Gain
Crosspoint gain adjusts the gain between a specific input and output, to create separate submixes without chang
ing input or output fader settings. Select the dB value at any crosspoint to open the gain adjustment panel.
Gain staging: input fader > crosspoint gain > output fader
Output / Destination Channel
Analog - To Codec (Analog output 1)
USB output
Mobile output
Analog - To Speaker (Analog output 2)
USB output
Mobile output
Analog - To Codec (Analog output 1)
Analog - To Speaker (Analog output 2)
Mobile output
Analog - To Codec (analog output 1)
Analog - To Speaker (analog output 2)
USB output
Shure Incorporated
23/96