BODY STRUCTURE [PANEL REPLACEMENT]
CENTER PILLAR REMOVAL [PANEL REPLACEMENT]
Symbol Mark
SYMBOL MARK
Removal Procedure
1. Rough cut area locations indicated by (A) then drill the 77 locations indicated by (B) shown in the figure.
ROOF RAIL REINFORCEMENT
ROUGH CUT
LOCATION
B-PILLAR
REINFORCEMENT
CENTER PILLAR (OUTER)
Caution
During rough cutting, be careful not to damage the roof rail reinforcement and side sill
reinforcement.
2. Remove the center pillar (outer).
MEANING
SPOT WELDING
ROUGH CUT LOCATION
CENTER PILLAR (OUTER)
CENTER PILLAR (OUTER)
SIDE SILL REINFORCEMENT
id098008743900
09-80B
am2zzb0000009
am6xub0000007
09-80B–55