Center Pillar Removal - Mazda 2002 6 Bodyshop Manual

CENTER PILLAR REMOVAL

1. Rough cut area (A), drill the 44 weld locations indicated by (B), then remove the lower part of the center pillar
outer.
2. Rough cut area (C), drill the 20 weld locations indicated by (D), then remove the center pillar outer.
3. Drill the 2 weld locations indicated by (E) and remove the B-pillar reinforcement.
End Of Sie
III–16
PANEL REPLACEMENT
A6E981270350B01
A6E9812B015