Front Pillar Installation [Panel Replacement]; Symbol Mark; Installation Procedure - Mazda 6 2009 Bodyshop Manual

BODY STRUCTURE [PANEL REPLACEMENT]

FRONT PILLAR INSTALLATION [PANEL REPLACEMENT]

Symbol Mark

SYMBOL MARK

Installation Procedure

1. When installing new parts, measure and adjust the body as necessary to conform with standard dimensions.
2. Drill holes for the plug welding before installing the new parts.
3. Apply body sealer to the joints of old and new parts for waterproofing and rust protection.
4. Cut-and-join area locations indicated by (A) then plug weld the 8 locations indicated by (B) shown in the figure.
FRONT PILLAR (INNER)
PLUG WELDING (CO 2 ARC WELDING)
CONTINUOUS CO 2 ARC WELDING (CUT-AND-JOIN LOCATION)
(B) 8
MEANING
220 mm {8.66 in}
(A)
id098008744800
09-80B
am2zzb0000008
am6zzb0000007
09-80B–51