REAR FENDER RAIN RAIL AND CORNER PLATE INSTALLATION [PANEL REPLACEMENT]
Symbol Mark
SYMBOL MARK
Installation Procedure
1. When installing new parts, measure and adjust the body as necessary to conform with standard dimensions.
2. Drill holes for plug welds before installing new parts.
3. After temporarily installing new parts, make sure the related parts fit properly.
4. Plug weld the 17 locations indicated by (A) shown in the figure.
Note
When replacing the rear fender rain rail and corner plate separately, weld the 4 locations indicated by (B).
REAR FENDER
RAIN RAIL
CORNER PLATE
End Of Sie
BM: REAR END PANEL
09-80B–76
BODY STRUCTURE [PANEL REPLACEMENT]
MEANING
PLUG WELDING (CO 2 ARC WELDING)
id098008612000
am6xub0000007
am6xub0000007