Rear Floor Pan Installation [Panel Replacement]; Symbol Mark; Installation Procedure - Mazda 6 2009 Bodyshop Manual

BODY STRUCTURE [PANEL REPLACEMENT]

REAR FLOOR PAN INSTALLATION [PANEL REPLACEMENT]

Symbol Mark

SYMBOL MARK

Installation Procedure

1. When installing new parts, measure and adjust the body as necessary to conform with standard dimensions.
2. Drill holes for the plug welding before installing the new parts.
3. After temporarily installing new parts, make sure the related parts fit properly.
4. Apply spot sealer to the areas where both the overlapping ends of the new and existing parts will be welded.
Adhere the sections to be welded, and fillet weld along both seams.
5. Apply body sealer to the joints of old and new parts for waterproofing and rust protection.
MEANING
2
PLUG WELDING (
CO
ARC WELDING
id098008742800
)
am2zzb0000003
09-80B–87
09-80B