BODY STRUCTURE [PANEL REPLACEMENT]
REAR FENDER PANEL INSTALLATION [PANEL REPLACEMENT]
Symbol Mark
SYMBOL MARK
Installation Procedure
1. When installing new parts, measure and adjust the body as necessary to conform with standard dimensions.
2. Drill holes for the plug welding before installing the new parts.
3. Before installing new parts, apply spot weld sealer to the tire arch line.
4. After temporarily installing new parts, make sure the related parts fit properly.
5. Cut-and-join area locations indicated by (A) then plug weld 99 locations indicated by (B) shown in the figure.
MEANING
PLUG WELDING (CO 2 ARC WELDING)
CONTINUOUS CO 2 ARC WELDING (CUT-AND-JOIN LOCATION)
id098008745000
09-80B
am6xub0000008
am6xub0000008
09-80B–71