Certification - Hach AquaTrend 51200 Instrument Manual

Certification

Product Safety
Immunity
Emissions
Page 90
Certification
Hach Company certifies this instrument was tested thoroughly, inspected and
found to meet its published specifications when it was shipped from the
factory. The standard AquaTrend
as indicated to the following instrumentation standards:
(Included in the safety report with the PS 1201 Power Supply)
UL 3101-1 (ETL Listing # H0492805390)
CSA C22.2 No. 1010.1 (ETLc Certification # H0492805390)
Certified by Hach to EN 61010-1 (IEC1010-1) per 73/23/EEC, supporting
test records by Intertek Testing Services.
The AquaTrend was tested with the Hach PS2401 and the PS 1201 Power
Supplies in a Portable AquaTrend configuration.
EN 61326
(EMC Requirements for Electrical Equipment for Measurement,
Control and Laboratory Use)
records by Hach Company, certified compliance by Hach Company.
Standards include:
IEC 1000-4-2:1995 (EN 61000-4-2:1995) Electro-Static Discharge
Immunity (Criteria B)
IEC 1000-4-3:1995 (EN 61000-4-3:1996) Radiated RF Electro-Magnetic
Field Immunity (Criteria A)
IEC 1000-4-4:1995 (EN 61000-4-4:1995) Electrical Fast Transients/Burst
(Criteria B)
IEC 1000-4-5:1995 (EN 61000-4-5:1995) Surge (Criteria B)
IEC 1000-4-6:1996 (EN 61000-4-6:1996) Conducted Disturbances
Induced by RF Fields (Criteria A)
IEC 1000-4-11:1994 (EN 61000-4-11:1994) Voltage Dip/Short
Interruptions (Criteria B)
Additional Immunity Standard/s include:
ENV 50204:1996 Radiated Electro-Magnetic Field from Digital
Telephones (Criteria A)
The AquaTrend was tested for Radio Frequency Emissions with both the
PS1201 and PS2401 Power Supplies as follows:
Per 89/336/EEC EMC: EN 61326:1998 (Electrical Equipment for
measurement, control and laboratory use—EMC requirements) Class
"A" emission limits. Supporting test records by Hewlett Packard, Fort
Collins, Colorado Hardware Test Center (A2LA # 0905-01) and certified
compliance by Hach Company.
Standards include
(applied only to the PS 1201 and 2401 Power Supplies)
EN 61000-3-2 Harmonic Disturbances Caused by Electrical Equipment
EN 61000-3-3 Voltage Fluctuation (Flicker) Disturbances Caused by
Electrical Equipment
®
Interface has been tested and is certified
per 89/336/EEC EMC:
Supporting test
51350-18 Certification.fm