Display Setup; Edit Name - Hach AquaTrend 51200 Instrument Manual

3.6 Display Setup

3.7 Edit Name

51350-18 Initial Aquatrend Setup.fm
3. Select Display Setup and press ENTER.
4. Select CHANNEL GRAPH SETTINGS from the Display Setup Menu and
press ENTER. A list of available channels will appear.
5. Select the channel of interest and press ENTER.
6. Select YMAX: and press ENTER.
7. Use the arrow keys to change the displayed value.
Repeat Steps 6 and 7 to change the YMIN: displayed value.
Negative numbers may be entered by changing the first character to a
negative sign with the arrow keys.
The AquaTrend Interface can display data from a single sensor or from up to
eight sensors at one time. Viewing additional channels reduces the amount of
information shown for each channel.
Access the display mode by pressing the DISPLAY key. Use the right arrow
key to increase the number of channels displayed on the screen. Press the
left arrow key to decrease the number of channels displayed. The up and
down arrow keys move the active channel designation.
Change the name of the AquaTrend Interface as follows:
1. Press the MENU key to access the Main Menu.
2. Move the pointer to AQUATREND MENU and press the ENTER key.
3. Select EDIT NAME and press the ENTER key.
4. Use the arrow keys (right or left arrows to move to another character
space in the name and up or down arrows to scroll through the available
Section 3
Page 33
Display Setup