Language Setting; Time/Date Setting; Setting The Time - Hach AquaTrend 51200 Instrument Manual

Section 3

3.2 Language Setting

3.3 Time/Date Setting

3.3.1 Setting the Time

Page 24
Language Setting
English is the default language of the AquaTrend Interface Network System.
To display another language, follow the instructions below:
1. Press the MENU key to begin at the Main Menu.
2. Use the up or down arrow key to select AQUATREND MENU and
press ENTER.
3. Select LANGUAGE and press ENTER.
4. Use the up or down arrow keys to move the pointer to the desired
language and press ENTER. All screens will be displayed in the
selected language.
Verify the time and date are correct. If necessary, change them as instructed
in the following sections.
1. Press the MENU key to access the Main Menu.
2. Use the up or down arrow key to move the pointer to AquaTrend Menu
and press ENTER.
3. Select the SET TIME/DATE option and press ENTER.
Note: The AquaTrend Interface uses a 24-hour clock (military time), so there is no
selection for a.m. and p.m. For example, if the current time is 4:00 p.m., enter the
24-hour format equivalent of 16:00.
a. Select SET TIME.
b. A pop-up box will prompt you to enter the new time. The numbers
representing the hour will be highlighted.
c. Press the up arrow key to increase the hour setting and press the
down arrow key to decrease the setting.
d. When the proper hour is displayed, press the right arrow key and set
the minutes as in step
e. Press ENTER to accept the displayed value, or press EXIT to cancel.
c above.
51350-18 Initial Aquatrend Setup.fm