Portable Aquatrend Interface Installation And Mounting - Hach AquaTrend 51200 Instrument Manual

Figure 16 Panel Mounting

5.2 Portable AquaTrend Interface Installation and Mounting

Figure 17 Portable AquaTrend Interface Handle/Stand
51350-18 Hardware Installation.fm
The rotary handle on the Portable AquaTrend Interface provides a stand for
placement on a flat surface. To position the handle, pull the handle out on both
sides of its base and rotate the handle to the position desired (see
Place the Portable AquaTrend Interface on a surface near the sensor where
the display is visible and the keypad is easily accessible.
Portable AquaTrend Interface Installation and Mounting
#10 Pan-head screws
3 Places
Panel with cutout removed and holes drilled
(for reference only)
Section 5
Figure 17).
Page 57