Detaching Recorder From Analog Output - Hach AquaTrend 51200 Instrument Manual

Section 4

4.1.5 Detaching Recorder from Analog Output

Page 46
Alarm to Relay Connections
6. A screen showing all of your selections will then appear. Select ATTACH
RECORDER TO ANALOG OUTPUT and press ENTER to confirm the
setting or select CANCEL and press ENTER. The message
CONFIGURING NETWORK...PLEASE WAIT will appear.
The OPERATION COMPLETE message will appear when the attachment
is complete.
1. Press the MENU key to access the Main Menu.
2. Select Network Menu and press ENTER.
3. Select RECORDER TO ANALOG OUT and press ENTER.
4. Select DETACH and press ENTER.
• If two or more sensors are found on the network, the AquaTrend
Interface will present a list of sensors from which to choose. Select
the sensor from the list.
• If two or more recorders are attached, a menu showing
Attached Recorders will appear. Select the recorder of interest
and press ENTER.
• If two or more Signal Output Modules are available, a menu of SOMs
will appear. Select the SOM of interest and press ENTER.
5. A screen showing all of your selections will then appear. Select DETACH
RECORDER FROM ANALOG OUTPUT and press ENTER to confirm the
setting or select CANCEL to exit without making changes. The message
CONFIGURING NETWORK...PLEASE WAIT will appear.
The OPERATION COMPLETE message will appear when the detachment
is complete.
51350-18 Alarms Relays Recorders.fm