List Network Devices; Displaying Alarm To Relay Connection Information - Hach AquaTrend 51200 Instrument Manual

3.9.1.1 List Network Devices

3.9.1.2 Displaying Alarm to Relay Connection Information

51350-18 Initial Aquatrend Setup.fm
Proceed with the following sections to access LIST NETWORK
DEVICES, ALARM TO RELAY, REC TO ANALOG OUT, and SENSOR
TO DDM CONNECTIONS.
1. Press the MENU key to access the Main Menu.
2. Move the pointer to NETWORK MENU and press the ENTER key.
3. Use the up or down arrow keys to move the pointer to
REVIEW NET CONNECTIONS and press the ENTER key.
4. Select LIST NETWORK DEVICES and press the ENTER key. If
necessary, select the device category you would like to review.
The Alarm to Relay connections identify which sensor alarm is attached to
which SOM relay.
1. Press the MENU key to access the Main Menu.
2. Move the pointer to NETWORK MENU and press the ENTER key.
3. Use the up or down arrow keys to move the pointer to
REVIEW NET CONNECTIONS and press the ENTER key.
4. Select ALARM to RELAY and press ENTER.
All alarm to relay connections will be displayed.
Section 3
Additional Network Menu Features
Page 37