Aquatrend Interface Display Description - Hach AquaTrend 51200 Instrument Manual

Screen Category
1. Menu Screen
2. Numeric Data Display
Screen (1 to 8 numeric
readings)
3. Graph Display Screen
4. Pop-up Entry Screen

1.4.3 AquaTrend Interface Display Description

Figure 3 AquaTrend Interface Display Categories
1. Menu Screen
51350-18 general description.fm
Table 4 Arrow Key Functions
Function
Move the pointer to next (down) or previous (up) item.
For menus no longer than one page, the pointer will loop around from the bottom to the top or
from the top to the bottom.
For multiple-page menus, the pointer will move to the next (down) or previous (up) page.
Left and Right Arrow: Changes the number of channels shown.
Press the Right Arrow to increase the number of channels or press the Left Arrow to decrease
the number of channels.
Up and Down Arrow: changes the active channel designation.
Up: displays preceding channel graph.
Down: displays next channel graph.
Left and Right Arrow: moves curser if it is enabled.
If not enabled, changes the graph time base.
Increment (up) and decrement (down) currently highlighted character.
Move highlight to next (right) or preceding (left) character. Loop around at either end.
Press the DISPLAY key to alternate between displaying the data in numeric
and graphical mode.
• Viewing data in numeric mode allows you to display from one to eight
measurements at the same time. When additional measurements are
shown on the screen, less information is displayed for those
measurements.
• Viewing data in graphical mode allows you to see a history of sensor
readings over the last 2 hours, 8 hours, 30 hours, 7 days, or 30 days,
depending on the graph time base selected. However, the AquaTrend
Interface displays data for only one channel at a time in the graphic mode.
For details on selecting the number of numeric channels of data shown and
the graph time base, see
Press the MENU key to return to the Main Menu at any time. To return to data
display mode, press either the EXIT or DISPLAY keys.
AquaTrend Interface screens appear in several different formats.
Sensor measurements are attached to separate channels, labeled A-P,
on the AquaTrend Interface. Refer to
of each field.
2. Numeric Data
Display Screen
section 3.5.1 and section
Figure 4 and
3. Graph Display Screen
Section 1
3.5.2.
Figure 5 for descriptions
4. Pop-up Entry Screen
Page 13
Instrument Description