Detaching An Alarm From A Relay - Hach AquaTrend 51200 Instrument Manual

Section 4

4.1.3 Detaching an Alarm from a Relay

Page 44
Alarm to Relay Connections
5. Select the sensor of interest and press ENTER.
6. Select the desired alarm and press ENTER.
7. Select the SOM of interest and press ENTER.
8. Choose the relay to attach to the alarm selected in step 6 and
press ENTER.
9. A screen showing the proposed connections will then appear.
Select ATTACH ALARM TO RELAY and press enter to confirm the
setting. Select CANCEL then press ENTER to exit without
making changes.
The message CONFIGURING NETWORK...PLEASE WAIT will appear,
followed by OPERATION COMPLETE when the alarm has been attached.
1. Press the MENU key to access the Main Menu.
2. Select the NETWORK MENU option and press ENTER.
3. Select ALARM TO RELAY and press ENTER.
4. Select DETACH from the resulting pop-up box and press ENTER.
5. A list of sensors from which to choose will be displayed. Select the sensor
of interest from the list and press the ENTER key or press the configure
button on the sensor of interest.
6. Select the alarm of interest and press ENTER.
51350-18 Alarms Relays Recorders.fm