3. Product description
Necessary triggering with analogue setpoint specification
The connection plan shows the switch position in the active operating state.
*) The limit switches are set by default to opener (configuration over FCT)
3.3.4
RS232 interface (diagnosis/ parameterization interface)
The RS232 interface is intended as a configuration interface.
Parameter
Signal level
Baud rate
ESD protection
Connection
Connection
Table 3.3 Parameters of the RS232 interface
26
In accordance with RS232 specification
or RS485 specification
9600 baud to 115k baud
ESD protected (16kV) driver
Null modem standard, X5
over X5 / DSUB 9 pin / pin
Festo P.BE-CMMS-AS-HW-EN en 0708NH