Installing The Cover - Siemens SIMATIC NET RUGGEDCOM RSG2100 Service Manual
Industrial ethernet switches
Hide thumbs
Also See for SIMATIC NET RUGGEDCOM RSG2100:
- Installation manual (56 pages) ,
- Installation manual (56 pages)
Table of Contents
Advertisement
Module Replacement
2.3.4 Installing the Cover
8.
9.
2.3.4
Installing the Cover
To install the cover, do the following:
1.
40
Install the five Torx screws indicated to secure the main inner assembly to the
chassis.
Figure 2.33
Installing the Bottom Screws
Carefully flip the device right-side up.
Place the cover over the chassis and align the screw holes.
RUGGEDCOM RSG2100
Service Manual, 07/2019, C79000-G8976-1151
Advertisement
Table of Contents
