Installing The Main Inner Assembly - Siemens SIMATIC NET RUGGEDCOM RSG2100 Service Manual

Module Replacement
2.3.3 Installing the Main Inner Assembly
4.
2.3.3

Installing the Main Inner Assembly

If the module was installed in slot 2, 4, 6, 8, or 10 along the bottom row, the main
inner assembly can now be installed back in the chassis.
To return the main inner assembly to the chassis, do the following:
1.
34
Secure the module to the main inner assembly with two Philip head screws.
Figure 2.27 Securing the Module
Discharge any static electricity before touching the main inner assembly.
RUGGEDCOM RSG2100
Service Manual, 07/2019, C79000-G8976-1151