Siemens SIMATIC NET RUGGEDCOM RSG2100 Service Manual page 39

Module Replacement
2.3.2 Installing a Module
Installing a Module (No Heatsink)
To install a module that does not require a heat sink, do the following:
1.
2.
32
If the module is to be installed on the underside of the main inner assembly, flip
the board.
Slide the module into the faceplate and align it with the connector in the main
inner assembly.
Figure 2.25 Inserting the Module
RUGGEDCOM RSG2100
Service Manual, 07/2019, C79000-G8976-1151