Module Replacement; Module Overview - Siemens SIMATIC NET RUGGEDCOM RSG2100 Service Manual

Module Replacement

Replacing modules requires accessing the internal daughter-board modules and re-
moving them from the motherboard. The device must only be opened by authorized
personnel and in a clean working environment free of airborne dust and debris. The
technician must wear proper Electrostatic Discharge (ESD) protective equipment to
prevent errant electrical currents from damaging the device.
NOTICE
Before replace modules
An in-field modification kit is required before replacing modules in the device. This
kit includes the required factory files and product label.
For information about ordering the appropriate kit, contact Siemens Customer Sup-
port.
2.1

Module Overview

The following daughter-board modules are available for use in the device.
Note
Some slots support only a specific type of module. For more information, refer to the
associated Installation Manual.
Module
RJ45
RUGGEDCOM RSG2100
Service Manual, 07/2019, C79000-G8976-1151
Picture
2
Heat Sink? Gap Pad?
û û
5